Another most common case is a drastic change in phone temperature which causes condensation on the camera lens, such as when you go out into the snow after being in a warm place, when you carry your phone in your pocket on a cold day, or when the phone is moved out of a hot and humid environment in general. for dry or air-conditioned.

Of course, if we immerse it in water for a long time, even if the phone has a waterproof rating of IPX7 or higher, the same problem can easily arise if we do not pay attention to the time and depth to which the phone has been submerged. But the truth is, it is. that this can be prevented, as we will see later.

Is this covered by the warranty?

This is one of the most frequently asked questions by users, and while most of today's phones that are advertised as waterproof are actually not as resistant as we thought, this means that, in principle, the liquid damage to these phones is not covered under the warranty and the user will have to pay the full cost of the repair. A clear example of two big brands, such as Samsung or Apple, is that they do not cover water-damaged phones.

And this is the case with other smartphone manufacturers, because no one is responsible for what we do with the clamps that are waterproof, so damage is never covered under the warranty offered by mobile brands. Plus, getting wet will corrode the internal components of the terminal. be the end of every phone call.

On the other hand, there are many insurances that will cover this particular section. Though for that we have to be the ones with or not employing this type of "protection".

Fix the wet camera

Yes, but not everyone can do it, which is what you should do if you see drops of water or mist on your smartphone's camera.

Silica bags

One of the most recommended methods that we will find in different parts of the internet will be to use classic silica bags. This method can help us absorb the moisture that the mobile camera has. Therefore, we can put the phone around the silica bags that are usually found in some products that we buy because their purpose is to absorb any possible moisture that arises in boxes of clothes or other items, for example, so we recommend that you buy these silica bags and put them in an airtight bag next to your wet phone.

Open the phone

The most feasible solution if you don't want to take your phone to the tech center is to disassemble your phone with a screwdriver and a set of levers and tools they sell on Amazon.For example, if you are looking for one to work, we recommend this cell phone repair kit where you will be had several tools with which you can open the phone to clean and repair the wet camera so it does not fog up:

Contact the technical service

The best option for a user suffering from this issue is to bring the phone to a support center as the phone itself shows signs of water ingress. Even if you only see it on the camera glass, it is quite likely that he had access to other parts of the phone such as the motherboard. and can damage your phone forever.

An experienced technician can safely open the phone and dry it properly, then close the phone again to prevent future water ingress issues.

Be careful with rice and heat

Today, almost all phones have unibody bodies, that is, they are terminals that prevent water from entering, but if liquid does get into your camera you'll definitely want to try the traditional rice trick to dry your phone.

At this point, it's important to point out that most specialized technicians found phones inside full of rice or tiny grains inside that damaged the internal components, so it's up to you whether or not you implement this solution, and although it's quite a repetitive method for many users , trying it may even be counterproductive.

In addition, as far as we see that one solution will be to apply heat ... we would be in a huge mistake, of course, this is not the same as letting a cell phone dry completely naturally at room temperature than heating it with a dryer, microwave oven, etc.

Therefore, as long as you keep your smartphone under supervision, you can expose it to direct sunlight, with the screen facing down and the wet camera facing the sun. This will remove some water, but if you want the post dryer or air conditioner to run in moisture absorption.

It's likely that once the moisture is removed it will reappear after a while, but the solution is to repeat this step over and over again until it is completely gone, just be patient, don't despair, and don't expose your phone to heat.

How to prevent it

Common sense is the best way to prevent your smartphone from getting damaged by getting it wet, be it in the camera, battery, any other element, or in the entire terminal in general. We must not forget that we are dealing with an electronic device, so its worst enemy will be water or any liquid. At least not yet.

However, if you intend to use your smartphone in the rain, near a swimming pool or in an environment with high humidity, the most appropriate solution is to buy a waterproof case that will protect the phone from liquid penetration through its interior. However, the best thing you can do is not to use it during these times to preserve the colors of your head and any possible inconvenience, and most of all make sure you don't end up with a wet camera.

For example, we can use this type of waterproof bags, in which we put the phone in whenever we want, just check if it is compatible with our smartphone: